Low Conductivity Management Liquid EV50

Low conductivity, meeting the requirements of electric motors for conductivity, while excellent anti-corrosion performance, which can meet the requirements of electric models and hybrid motor models for coolant.

● Very low conductivity, with the selection of organic non-ionic corrosion inhibitor, the conductivity of the conventional coolant 1/1000. Ensure that the positive and negative extremes of the battery pack without short-circuit in case of abnormal coolant leakage.

● Excellent material compatibility, excellent corrosion inhibition and protection for various metal and non-metal components in the battery cooling system.

● Excellent foam suppression performance, which can inhibit foam generation, eradicate foam impact on the metal surface caused by cavitation corrosion, especially to provide strong protection for the pump blade.

Scope of Application

Meeting or exceeding the following requirements: Meet VWTL-774 (2010), exceed ASTM D3306 and NB/SH/T0521-2010 and other relevant coolant standards.

Applicable car model: Suitable for a variety of light load engine coolant system of hybrid, pure electric vehicles.

Execution standard: Q/SDNR007-2023

Instructions: Please drain the coolant according to the requirements of the vehicle manufacturer, if necessary, please rinse first and then fill the coolant; when ready-to-use, do not dilute with water; as some vehicles have special filling requirements, please refer to the requirements of the automobile manufacturer; Please check the level after the initial filling, which may decrease as air is removed from the system.

Suitable for all types of hybrid and pure electric vehicles using glycol based coolants, not for fuel cell vehicles and vehicles requiring specific low conductivity coolants. This product is not recommended for heavy commercial vehicles and non-road equipment use.